Souliss

The board can be animated by the souliss framework, the code is available on GitHub here: https://github.com/RiRomain/RGB_Strip_Control_ESP8266_Souliss

Download the latest code from GitHub, unzip it anywhere on your computer, open the downloaded file with Arduino IDE, set your Wifi Name (SSID) and Password, upload the code and your good to go!

After uploading the code to the ESP8266 you can use a serial monitor (speed: 76800) and the board will print out the attributed IP address at initialisation.

The IP address can then be used to configure the Souliss Android application that allow control of the board.